The mixture prepared in the efficient integrated mixer is poured directly into the hopper and aspirated by the “Rotor-Stator” pumping system. The pump pushes the mixture into the hose until it reaches the opposite end, where with the help of the powerful 400 l / min compressor and the spray gun, the material is projected onto the application area.
The machine can be started and stopped directly via the air tap located on the spray gun. Different accessories dedicated to spraying, controlled pressure injections, fills or jets can be connected to the hose. In the case of grouting or self-levelling screeds, “open hose” is used.
The pumping speed adjustment from 0 to 60 l / min allows to adapt the pump also to applications where the quantities of product to be pumped are small, such as in the case of:
- Mortars for grouting
- Adhesives for thermal insulation coatings
- Decorative finishes for thermal insulation coatings
- Waterproofing seal (only for large surfaces)
It is equipped with a forced mixer with horizontal axis with hydraulic system to overturn the material in the hopper. In some applications where the quantities of material to be pumped are significant, the Prestige can be equipped with a high-performance pumping unit and loaded directly by a truck mixer or dumper.
Equipped with a standard “2L6” pumping group, capable of satisfying most pumping and spraying needs, it can be further optimized for specific needs, due to a wide range of optional accessories.
