Small 50 Evo

Ultra-compact, light and powerful. Accessories allow the pumping or spraying of multiple products:

• Traditional lime / cement plasters
• Premixed / pre-dosed plasters based on cement and lime
• Premixed / pre-dosed structural plasters
• Premixed / pre-dosed restorative plasters
• Binders / mortars for consolidation injections
• Insulating plasters polystyrene or cork based
• Thixotropic fiber-reinforced reinforcement mortars
• Fill core grout / Grouts
• Self-levelling cement / anhydride based screeds
• Tuckpointing
• All free-solvent paints
• Adhesives for thermal insulation coatings
• Fine coating/ Skim cote
• Smoothers for decorative finishing with silicates or minerals
• Waterproofing plasters, even fiber-reinforced
• Fireproofing

Small 50 EVO is usually positioned under the discharge outlet of a mixer to pour the mixture directly into the hopper.
Wet products that do not need to be mixed, can be poured directly into the hopper.
The mixture contained in the hopper is sucked by the rotor-stator pumping system and pushed into the hose until it reaches the opposite end.
Accessories and devices for spraying and injecting material at controlled pressure can be connected. A hose can also be used on the machine for pouring the self-levelling or filling products.
Set the pumping speed using the exclusive IMER A1 inverter, adapting the machine to different needs.
Small 50 EVO is equipped with a diagnostic display, which signals any anomalies during use and related resolution methods.
The exclusive IMER A1 inverter allows the Small 50 EVO to operate with appropriately sized generators.