Koine 35 | EN - Intonacatrici


Koine 35

Single-phase plaster sprayer for mixing and spraying plastering mortars in bags or from silo: premixed materials, gypsum base premixed materials, insulating plasters, lightened materials

Product sheet




Data sheet

Standard Equipment

  • Standard mixer
  • Stator and Rotor D5-2.5 Monoflex (Purple)
  • Material delivery pressure gauge
  • Control panel with exclusive IMER R2 4-speeds inverter and diagnostic display
  • INGX2 stainless steel self-priming electropump
  • Brass water system with flow meter and with ANTIFREEZE discharge
  • 20 m electric cable with 16 A plug
  • 20 m water hose Ø 13 mm
  • 16 m air hose Ø 13 mm
  • 15 m material hose Ø 25 mm
  • Spray gun with deflectors
  • Built-in accessory box complete with washing sponge and nozzle cleaner
  • Scraper
  • Camlock adapter Ø 35F - Ø 25M
  • Rotor replacement wrench


Continuous cycle mixing pump, suitable for pumping or spraying all dry premixed materials:
• Cement / lime / gypsum plaster based
• Structural reinforcement mortars
• Structural plasters
• Restorative plasters
• Stucco
• Binders / mortars for injections
• Grout / Core-Fill Grout
• Glues for thermal insulation coatings
• Thermal insulating screeds based on cork or polystyrene
• Insulating plasters based on polystyrene or cork
• Fireproofing mortar
• Self-levelling cement-based screeds
• Self-levelling anhydride-based screeds
• Mortars for fire protection