Mortar and plaster sprayers | Spraying and Pumping Systems

Building Equipment

Mortar and plaster sprayers

Koine 3.1

Continuous cycle spraying and mixing pump. Suitable for the application of all the premixed products contained in bags, with a particular aptitude for the application of structural mortars, dehumidifying materials and products for smoothing thermal insulation panels.

Koine 4

Three-phase plaster sprayer for mixing and spraying plastering mortars in bags or from silo: premixed materials, gypsum base premixed materials, insulating plasters, lightened materials

Koine 4 Hi-Flow

High flow continuous cycle mixing pump, suitable for pumping large volumes of material in bags (up to 220 bags per hour). Ideal for laying self-levelling screeds in bags with a minimum thickness of 2 cm.

Koine 35

Single-phase plaster sprayer for mixing and spraying plastering mortars in bags or from silo: premixed materials, gypsum base premixed materials, insulating plasters, lightened materials

Storm Plus

Pneumatic conveying system for dry premixed mortars.

Speedy

Professional finishing machine for smoothing raw plasters or skim coats in general with water spray nozzle. Easy to use with minimal effort, it almost completely replaces the traditional manual plaster finishing, significantly increasing daily production.

SMALL 50 EVO

Polyvalent eccentric screw pump, plastering / fillering machine.

MIGHTY SMALL 50 PLUS

Multi-purpose eccentric screw pump, plastering machine, airless pump

S 50 AIRLESS

High pressure eccentric screw spraying system.

STEP 120 Single phase

Single-phase eccentric screw plastering pump. Optional planetary mixer.

STEP 120 Three phase

Three-phase eccentric screw plastering pump. Optional planetary mixer.

Prestige

Plaster sprayer with Diesel engine for dry premixed materials. ECO TPOWER system adjusting revolution number according to working phase. Mixer capacity: 180 l