Connect the machine to the available electrical network. The machine will automatically adapt its maximum speed to the available power. The product contained in the bags, or coming from the silo, is poured into the hopper, where a feeding wheel will fill the mixing chamber in a continuous and constant way. The water needed to obtain the mix is injected into the mixing chamber by a stainless steel pump. The water flow is kept constant by a particular stabilization system and controlled by a valve which starts or stops the flow when necessary.The amount of water in the mixture can be viewed in the flow meter and can be adjusted according to need using a micrometric valve.The material is mixed with water and immediately sucked by the eccentric screw pump, to then be pushed into the pipe until it reaches the end of the spray gun. From here, with the help of the air supplied by the standard built-in compressor, it is sprayed on the application area, from a distance of about 20 cm. The material flow can be started or stopped directly from the spray gun by opening or closing the air valve. Washing is simple, very fast and without spreading water and material in the work area. The only area that needs to be cleaned is the one where the mixture takes place. The unused dry material can remain in the hopper and be removed if necessary, by opening the appropriate discharge plug at the bottom of the hopper.
Koine Dual is equipped with status diagnostics, which ensures electrical protection in any case of system overload or use anomaly, indicating the complete status of the machine on the 5″ TFT display:
- Supply voltage and power
- Working voltage
- Current consumption
- Work hours
- Type of anomaly
- Type of stator used
The parameters displayed directly can be modified according to your preferences using the inductive buttons that allow access to the setup menus.
