Power supply: Single-phase or Three-phase
Mixer motor power: 2.2 / 5.5 kW
Average yield per cycle: 160/220 l
Tank capacity: 270 l
Weight: 630/750 kg
Pneumatically operated pumps, with powerful horizontal axis mixer with direct transmission. To be connected to the power line and to a compressor.
With loading bucket as standard for Mover 190e EVO. Versions available with and without loading bucket for Mover 270e.
Light and easy to handle, easy to use and transport, they are at the same time robust and particularly resistant to wear. The machines are ideal in all those cases where you have a compressor to match.
They are suitable for pumping:
- Traditional sand / cement screed (also with fiber)
- Premixed cement screed (also with fibers)
- Screed lightened with expanded clay / sand / cement
- Lightened screed pre-dosed with expanded clay
- Screed lightened with cork / sand / cement
- Lightened premixed screed with polystyrene
- Lightened premixed cement screed
- Concrete with a maximum grain of 16 mm
- Dry sand
- Washed gravel with a maximum grain of 16 mm
- Draining soil for gardens
The Mover 190eb EVO / 270e pneumatic pumps must be connected to the power line and to a compressor with the following requirements:
Mover 190eb EVO Minimum flow 2500 l / min (88.3 cfm), Pressure 7 bar (101.5 psi)Mover 270e Minimum flow rate 3500 l / min (123.6 cfm), Pressure 7 bar (101.5 psi)
All dry material is poured into the loading bucket manually or through the scraper blade (optional). In the version without loading bucket, the dry material is poured directly into the barrel manually. The bucket is raised hydraulically by the double acting piston until it reaches the maximum inclination of 65°. The material descends into the barrel where the powerful mixer (already in operation) begins its action. About halfway through the loading of the material, the water is added manually inside the barrel. When loading is complete, without waiting times, the hatch is closed and the barrel is pressurized by pressing the “Automatic cycle” button on the control panel. The air flow forcefully conveys the material through the hoses until it reaches the end point where the flow breaker stand is installed. When the barrel is empty, the air flow stops automatically and the machine is ready for a new loading.
The powerful horizontal axis mixer also homogeneously mixes particularly difficult and / or fiber-rich products. For those particular materials that require a longer mixing time, it is possible to set a time of your choice, which will delay the emptying phase after pressing the “Automatic cycle” button. The hoses at the end of the cycle always remain empty. This simplifies washing operations at the end of the day. It will be enough to clean the barrel with water and pump the appropriate sponge ball into the hoses.
Mover 190eb EVO / 270e are equipped with safety devices and reversal of the direction of rotation of the mixer, useful in case of accidental blocking of the mixer or clogging of the hose to facilitate release. With the help of additional compressors and special accessories they can reach high distances and pumping heights.