The Prestige CL is designed to mix, pump, and spray bagged premixed products. It can be loaded directly from external mini truck mixer or big size concrete mixer, if necessary.
The mixture is prepared by breaking the bags of premixed product into an efficient horizontal-shaft forced-action mixer, with hydraulic system for tipping the material into the hopper. Here the material is further mixed by a share-type agitator shaft before being aspirated by the “Rotor-Stator” pumping system. The pump pushes the mixture into the hose until it reaches the opposite end, at the application site. Where required, the material can be projected onto the application area using the powerful standard 400 l/min compressor and the spray gun.
The machine can be started and stopped by remote control or by the air tap located on the spray gun.
In the case of filling mortars or concrete, the Prestige CL is used in “open hose” mode. The pumping speed adjustment allows to adapt the pump to applications where the quantities of product to be pumped are small, or for pumping into formwork where the mortar needs time to flow gradually and fill all available spaces.
The Prestige CL is not standard equipped with a pumping unit or hose. This allows the user to choose the appropriate equipment, either at the time of purchase or later, based on the specific type of work to be done.
The hose can be made of steel or rubber and comes in various diameters, depending on the application.